Monel 400 Alloy (UNS N04400/ W.Nr. 2.4360 ati 2.4361)
Ọja Ifihan
Alloy 400 (UNS N04400) jẹ alloy-ojutu ti o lagbara ti o le ṣe lile nikan nipasẹ iṣẹ tutu. Kemistri nickel-Ejò ṣe ẹya kikankikan giga kan-alakoso ri to ojutu metallurgical be. O ni agbara giga ati lile lori iwọn otutu jakejado ati atako to dara julọ si ọpọlọpọ awọn agbegbe ibajẹ. Monel 400 jẹ ọkan ninu awọn alloy diẹ ti o ṣetọju agbara rẹ ni iha-odo tabi awọn iwọn otutu cryogenic.
Alloy 400 ti ni lilo pupọ ni awọn ohun elo ti o nilo resistance to lagbara si awọn agbegbe ibajẹ ti o nfihan acids, alkalies, ati nya si iwọn otutu giga. paapa tona ati kemikali processing.
Gẹgẹbi alloy nickel-copper, alloy 400 ni o ni aabo ipata to dara julọ ni ọpọlọpọ awọn media. Alloy 400 jẹ ijuwe nipasẹ idiwọ ipata gbogbogbo rẹ, weldability ti o dara, ati iwọntunwọnsi si agbara giga ni awọn ipo iwọn otutu. Yi alloy ni o ni o tayọ resistance to nyara ti nṣàn ati ki o gbona okun omi, brackish omi, ati nya. O jẹ paapaa sooro si hydrochloric ati hydrofluoric acids nigbati wọn ba jẹ aerẹ. Alloy yii jẹ oofa die-die ni iwọn otutu yara. Alloy 400 jẹ lilo pupọ ni kemikali, epo, ati awọn ile-iṣẹ imọ-ẹrọ omi okun.
Awọn ohun elo ti o wọpọ jẹ Awọn oluyipada Ooru, Awọn olupilẹṣẹ nya, awọn imuduro omi ati awọn ohun mimu, itanna ati awọn ohun elo itanna, Awọn igbona omi ifunni igbomikana, awọn igbona ti npa, ile-iṣẹ omi ati awọn paati gbigbe ọkọ oju omi bii awọn ategun, awọn ọpa, awọn fasteners
Alloy 400 le ni imurasilẹ ni imurasilẹ, ẹrọ ati darapo nipa lilo awọn ilana boṣewa. Ni gbogbogbo, tutu-ya tabi tutu iyaworan ati wahala ohun elo pese ẹrọ ti o dara ju ati ki o gbe awọn smoothest pari. Gbogbo awọn ilana alurinmorin boṣewa le ṣee lo si alloy 400. alloy naa le tun darapọ mọ awọn alloy ti o yatọ ti o nlo awọn ohun elo ti o yẹ. Ni afikun, didapọ ṣee ṣe nipasẹ brazing tabi soldering.
Ohun elo
Alloy 400 ti ni lilo pupọ ni awọn ohun elo ti o nilo resistance to lagbara si awọn agbegbe ibajẹ ti o nfihan acids, alkalies, ati nya si iwọn otutu giga. paapa tona ati kemikali processing. Awọn ohun elo ti o wọpọ jẹ Awọn oluyipada Ooru, Awọn olupilẹṣẹ Nya si, awọn imuduro omi ati awọn fasteners, itanna ati awọn paati itanna.
Awọn pato ọja
ASTM B163, ASTM B165
Awọn ibeere Kemikali
Alloy 400 (UNS N04400)
Àkópọ̀%
| Ni Nickel | Cu Ejò | Fe lron | Mn Manganese | C Erogba | Si Silikoni | S Efin |
| 63.0 iṣẹju | 28.0-34.0 | 2.5 ti o pọju | 2.0 ti o pọju | 0.3 ti o pọju | 0.5 ti o pọju | ti o pọju 0.024 |
| Darí Properties | |
| Agbara Ikore | 28 Ksi min |
| Agbara fifẹ | 70 Ksi min |
| Ilọsiwaju (iṣẹju 2") | 35% |
Ifarada Iwọn
| OD | OD Toleracne | Ifarada WT |
| Inṣi | mm | % |
| 1/8" | +0.08/-0 | +/- 10 |
| 1/4" | +/- 0.10 | +/- 10 |
| Titi di 1/2" | +/- 0.13 | +/-15 |
| 1/2" si 1-1/2", excl | +/- 0.13 | +/- 10 |
| 1-1/2" si 3-1/2", excl | +/- 0.25 | +/- 10 |
| Akiyesi: Ifarada naa le ṣe adehun ni ibamu si awọn ibeere pataki ti alabara | ||
| Titẹ gbigba laaye ti o pọju (ẹyọkan: BAR) | ||||||||
| Sisanra ogiri (mm) | ||||||||
| 0.89 | 1.24 | 1.65 | 2.11 | 2.77 | 3.96 | 4.78 | ||
| OD(mm) | 6.35 | 322 | 469 | 642 | 830 | |||
| 9.53 | 207 | 297 | 409 | 539 | 723 | |||
| 12.7 | 153 | 217 | 296 | 390 | 530 | |||
| 19.05 | 141 | 191 | 249 | 336 | ||||
| 25.4 | 105 | 141 | 183 | 245 | 363 | 450 | ||
| 31.8 | 111 | 144 | 192 | 283 | 349 | |||
| 38.1 | 92 | 119 | 159 | 232 | 285 | |||
| 50.8 | 69 | 89 | 117 | 171 | 209 | |||
Iwe-ẹri Ọla
ISO9001/2015 Standard
ISO 45001/2018 Standard
Iwe-ẹri PED
TUV Hydrogen ijẹrisi igbeyewo ibamu
| Rara. | Iwọn (mm) | |
| OD | Thk | |
| BA Tube Inner dada roughness Ra0.35 | ||
| 1/4 ″ | 6.35 | 0.89 |
| 6.35 | 1.00 | |
| 3/8 ″ | 9.53 | 0.89 |
| 9.53 | 1.00 | |
| 1/2” | 12.70 | 0.89 |
| 12.70 | 1.00 | |
| 12.70 | 1.24 | |
| 3/4” | 19.05 | 1.65 |
| 1 | 25.40 | 1.65 |
| BA Tube Inner dada roughness Ra0.6 | ||
| 1/8 ″ | 3.175 | 0.71 |
| 1/4 ″ | 6.35 | 0.89 |
| 3/8 ″ | 9.53 | 0.89 |
| 9.53 | 1.00 | |
| 9.53 | 1.24 | |
| 9.53 | 1.65 | |
| 9.53 | 2.11 | |
| 9.53 | 3.18 | |
| 1/2 ″ | 12.70 | 0.89 |
| 12.70 | 1.00 | |
| 12.70 | 1.24 | |
| 12.70 | 1.65 | |
| 12.70 | 2.11 | |
| 5/8 ″ | 15.88 | 1.24 |
| 15.88 | 1.65 | |
| 3/4 ″ | 19.05 | 1.24 |
| 19.05 | 1.65 | |
| 19.05 | 2.11 | |
| 1 ″ | 25.40 | 1.24 |
| 25.40 | 1.65 | |
| 25.40 | 2.11 | |
| 1-1/4 ″ | 31.75 | 1.65 |
| 1-1/2 ″ | 38.10 | 1.65 |
| 2″ | 50.80 | 1.65 |
| 10A | 17.30 | 1.20 |
| 15A | 21.70 | 1.65 |
| 20A | 27.20 | 1.65 |
| 25A | 34.00 | 1.65 |
| 32A | 42.70 | 1.65 |
| 40A | 48.60 | 1.65 |
| 50A | 60.50 | 1.65 |
| 8.00 | 1.00 | |
| 8.00 | 1.50 | |
| 10.00 | 1.00 | |
| 10.00 | 1.50 | |
| 10.00 | 2.00 | |
| 12.00 | 1.00 | |
| 12.00 | 1.50 | |
| 12.00 | 2.00 | |
| 14.00 | 1.00 | |
| 14.00 | 1.50 | |
| 14.00 | 2.00 | |
| 15.00 | 1.00 | |
| 15.00 | 1.50 | |
| 15.00 | 2.00 | |
| 16.00 | 1.00 | |
| 16.00 | 1.50 | |
| 16.00 | 2.00 | |
| 18.00 | 1.00 | |
| 18.00 | 1.50 | |
| 18.00 | 2.00 | |
| 19.00 | 1.50 | |
| 19.00 | 2.00 | |
| 20.00 | 1.50 | |
| 20.00 | 2.00 | |
| 22.00 | 1.50 | |
| 22.00 | 2.00 | |
| 25.00 | 2.00 | |
| 28.00 | 1.50 | |
| BA Tube, Ko si ibeere nipa roughness inu inu | ||
| 1/4 ″ | 6.35 | 0.89 |
| 6.35 | 1.24 | |
| 6.35 | 1.65 | |
| 3/8 ″ | 9.53 | 0.89 |
| 9.53 | 1.24 | |
| 9.53 | 1.65 | |
| 9.53 | 2.11 | |
| 1/2 ″ | 12.70 | 0.89 |
| 12.70 | 1.24 | |
| 12.70 | 1.65 | |
| 12.70 | 2.11 | |
| 6.00 | 1.00 | |
| 8.00 | 1.00 | |
| 10.00 | 1.00 | |
| 12.00 | 1.00 | |
| 12.00 | 1.50 | |